Home
:: Contractors, Fabricators & erectors :: Crane owners and hirers :: Machinery for hire :: Enquiries :: Contact us
Home> Crane Owners and Hires>Types of Cranes >Crawler TATA 320 Crane 20 M.T.
Mechanical Bucyrus Erie Crane 35 M.T | Telescopic TIL Crane 28 M.T. | Crawler TATA 320 Crane 20 M.T. | Escorts HYDRA 10 M.T

T A T A 320

DRUM ATTACHMENT FUNCTION NOTES
LEST MAIN (HOIST AND DIGGING DRUM SHAFT) * Crane Clamshell Draggline Main load line Closes clam Drags Bucket *Power lowering opting available, crane only. Smooth lagging.
RIGHT MAIN (HOIST AND DIGGING DRUM SHAFT) Crane
Clamshell
Dragline
Backhoe
Shovel		 Secondary load line Holding line
Hoist line
Hoist Line
Hoist line		  
    Snake Line Pile driver, or as needed.  

INSTALLING CRANE BOOM

Carefully move the machine up to the cribbed up boom, and line up the holes in the boom foot lugs and the boom foot. Install boom foot pins and secure them with cotter pins. Secure the boom backstops to the gantry sheave shaft. Reeve all lines.
ATTACHING JIB

To attach the jib, proceed as follows.

  1. With the boom approximately horizontal,m secure the jib to the boom point.
  2. Insatall the jib strut on the jib.
  3. Install the jib suspecsion lines from the jib point to the strut and from the strut to the turnbuckle at the boom foot. See Figure 5-1. The jib suspension lines should be adjusted so that the offset angle of the jib to the boom,
A. CALMSHEEL ATTACHMENT

B. DRAGLINE ATTACHMENT

NOTE: Boom hoist reevingis the same for dragline operation as for crane operation

CAUTION
The magnet generator is designed to operate at second speed only. In first gear, the generator will not develop the rated voltage. In third and fourth speed, the generator may be seriously damage by excessive speed.